pub struct GroupsProxyParIter<'a> { /* private fields */ }
Available on crate feature
algorithm_group_by
only.Trait Implementations§
Source§impl<'a> ParallelIterator for GroupsProxyParIter<'a>
impl<'a> ParallelIterator for GroupsProxyParIter<'a>
Source§type Item = GroupsIndicator<'a>
type Item = GroupsIndicator<'a>
The type of item that this parallel iterator produces.
For example, if you use the
for_each
method, this is the type of
item that your closure will be invoked with.Source§fn drive_unindexed<C>(self, consumer: C) -> C::Resultwhere
C: UnindexedConsumer<Self::Item>,
fn drive_unindexed<C>(self, consumer: C) -> C::Resultwhere
C: UnindexedConsumer<Self::Item>,
Internal method used to define the behavior of this parallel
iterator. You should not need to call this directly. Read more
§fn for_each<OP>(self, op: OP)
fn for_each<OP>(self, op: OP)
Executes
OP
on each item produced by the iterator, in parallel. Read more§fn for_each_with<OP, T>(self, init: T, op: OP)
fn for_each_with<OP, T>(self, init: T, op: OP)
§fn for_each_init<OP, INIT, T>(self, init: INIT, op: OP)
fn for_each_init<OP, INIT, T>(self, init: INIT, op: OP)
Executes
OP
on a value returned by init
with each item produced by
the iterator, in parallel. Read more§fn try_for_each<OP, R>(self, op: OP) -> R
fn try_for_each<OP, R>(self, op: OP) -> R
Executes a fallible
OP
on each item produced by the iterator, in parallel. Read more§fn try_for_each_with<OP, T, R>(self, init: T, op: OP) -> R
fn try_for_each_with<OP, T, R>(self, init: T, op: OP) -> R
Executes a fallible
OP
on the given init
value with each item
produced by the iterator, in parallel. Read more§fn try_for_each_init<OP, INIT, T, R>(self, init: INIT, op: OP) -> R
fn try_for_each_init<OP, INIT, T, R>(self, init: INIT, op: OP) -> R
Executes a fallible
OP
on a value returned by init
with each item
produced by the iterator, in parallel. Read more§fn map<F, R>(self, map_op: F) -> Map<Self, F>
fn map<F, R>(self, map_op: F) -> Map<Self, F>
Applies
map_op
to each item of this iterator, producing a new
iterator with the results. Read more§fn map_with<F, T, R>(self, init: T, map_op: F) -> MapWith<Self, T, F>
fn map_with<F, T, R>(self, init: T, map_op: F) -> MapWith<Self, T, F>
Applies
map_op
to the given init
value with each item of this
iterator, producing a new iterator with the results. Read more§fn map_init<F, INIT, T, R>(
self,
init: INIT,
map_op: F,
) -> MapInit<Self, INIT, F>
fn map_init<F, INIT, T, R>( self, init: INIT, map_op: F, ) -> MapInit<Self, INIT, F>
Applies
map_op
to a value returned by init
with each item of this
iterator, producing a new iterator with the results. Read more§fn inspect<OP>(self, inspect_op: OP) -> Inspect<Self, OP>
fn inspect<OP>(self, inspect_op: OP) -> Inspect<Self, OP>
Applies
inspect_op
to a reference to each item of this iterator,
producing a new iterator passing through the original items. This is
often useful for debugging to see what’s happening in iterator stages. Read more§fn update<F>(self, update_op: F) -> Update<Self, F>
fn update<F>(self, update_op: F) -> Update<Self, F>
Mutates each item of this iterator before yielding it. Read more
§fn filter<P>(self, filter_op: P) -> Filter<Self, P>
fn filter<P>(self, filter_op: P) -> Filter<Self, P>
Applies
filter_op
to each item of this iterator, producing a new
iterator with only the items that gave true
results. Read more§fn filter_map<P, R>(self, filter_op: P) -> FilterMap<Self, P>
fn filter_map<P, R>(self, filter_op: P) -> FilterMap<Self, P>
Applies
filter_op
to each item of this iterator to get an Option
,
producing a new iterator with only the items from Some
results. Read more§fn flat_map<F, PI>(self, map_op: F) -> FlatMap<Self, F>
fn flat_map<F, PI>(self, map_op: F) -> FlatMap<Self, F>
Applies
map_op
to each item of this iterator to get nested parallel iterators,
producing a new parallel iterator that flattens these back into one. Read more§fn flat_map_iter<F, SI>(self, map_op: F) -> FlatMapIter<Self, F>
fn flat_map_iter<F, SI>(self, map_op: F) -> FlatMapIter<Self, F>
Applies
map_op
to each item of this iterator to get nested serial iterators,
producing a new parallel iterator that flattens these back into one. Read more§fn reduce<OP, ID>(self, identity: ID, op: OP) -> Self::Item
fn reduce<OP, ID>(self, identity: ID, op: OP) -> Self::Item
Reduces the items in the iterator into one item using
op
.
The argument identity
should be a closure that can produce
“identity” value which may be inserted into the sequence as
needed to create opportunities for parallel execution. So, for
example, if you are doing a summation, then identity()
ought
to produce something that represents the zero for your type
(but consider just calling sum()
in that case). Read more§fn reduce_with<OP>(self, op: OP) -> Option<Self::Item>
fn reduce_with<OP>(self, op: OP) -> Option<Self::Item>
Reduces the items in the iterator into one item using
op
.
If the iterator is empty, None
is returned; otherwise,
Some
is returned. Read more§fn fold<T, ID, F>(self, identity: ID, fold_op: F) -> Fold<Self, ID, F>
fn fold<T, ID, F>(self, identity: ID, fold_op: F) -> Fold<Self, ID, F>
Parallel fold is similar to sequential fold except that the
sequence of items may be subdivided before it is
folded. Consider a list of numbers like
22 3 77 89 46
. If
you used sequential fold to add them (fold(0, |a,b| a+b)
,
you would wind up first adding 0 + 22, then 22 + 3, then 25 +
77, and so forth. The parallel fold works similarly except
that it first breaks up your list into sublists, and hence
instead of yielding up a single sum at the end, it yields up
multiple sums. The number of results is nondeterministic, as
is the point where the breaks occur. Read more§fn fold_with<F, T>(self, init: T, fold_op: F) -> FoldWith<Self, T, F>
fn fold_with<F, T>(self, init: T, fold_op: F) -> FoldWith<Self, T, F>
Applies
fold_op
to the given init
value with each item of this
iterator, finally producing the value for further use. Read more§fn try_fold<T, R, ID, F>(
self,
identity: ID,
fold_op: F,
) -> TryFold<Self, R, ID, F>
fn try_fold<T, R, ID, F>( self, identity: ID, fold_op: F, ) -> TryFold<Self, R, ID, F>
Performs a fallible parallel fold. Read more
§fn try_fold_with<F, T, R>(self, init: T, fold_op: F) -> TryFoldWith<Self, R, F>
fn try_fold_with<F, T, R>(self, init: T, fold_op: F) -> TryFoldWith<Self, R, F>
Performs a fallible parallel fold with a cloneable
init
value. Read more§fn min_by<F>(self, f: F) -> Option<Self::Item>
fn min_by<F>(self, f: F) -> Option<Self::Item>
Computes the minimum of all the items in the iterator with respect to
the given comparison function. If the iterator is empty,
None
is
returned; otherwise, Some(min)
is returned. Read more§fn min_by_key<K, F>(self, f: F) -> Option<Self::Item>
fn min_by_key<K, F>(self, f: F) -> Option<Self::Item>
Computes the item that yields the minimum value for the given
function. If the iterator is empty,
None
is returned;
otherwise, Some(item)
is returned. Read more§fn max_by<F>(self, f: F) -> Option<Self::Item>
fn max_by<F>(self, f: F) -> Option<Self::Item>
Computes the maximum of all the items in the iterator with respect to
the given comparison function. If the iterator is empty,
None
is
returned; otherwise, Some(max)
is returned. Read more§fn max_by_key<K, F>(self, f: F) -> Option<Self::Item>
fn max_by_key<K, F>(self, f: F) -> Option<Self::Item>
Computes the item that yields the maximum value for the given
function. If the iterator is empty,
None
is returned;
otherwise, Some(item)
is returned. Read more§fn chain<C>(self, chain: C) -> Chain<Self, <C as IntoParallelIterator>::Iter>where
C: IntoParallelIterator<Item = Self::Item>,
fn chain<C>(self, chain: C) -> Chain<Self, <C as IntoParallelIterator>::Iter>where
C: IntoParallelIterator<Item = Self::Item>,
Takes two iterators and creates a new iterator over both. Read more
§fn find_any<P>(self, predicate: P) -> Option<Self::Item>
fn find_any<P>(self, predicate: P) -> Option<Self::Item>
Searches for some item in the parallel iterator that
matches the given predicate and returns it. This operation
is similar to
find
on sequential iterators but
the item returned may not be the first one in the parallel
sequence which matches, since we search the entire sequence in parallel. Read more§fn find_first<P>(self, predicate: P) -> Option<Self::Item>
fn find_first<P>(self, predicate: P) -> Option<Self::Item>
Searches for the sequentially first item in the parallel iterator
that matches the given predicate and returns it. Read more
§fn find_last<P>(self, predicate: P) -> Option<Self::Item>
fn find_last<P>(self, predicate: P) -> Option<Self::Item>
Searches for the sequentially last item in the parallel iterator
that matches the given predicate and returns it. Read more
§fn find_map_any<P, R>(self, predicate: P) -> Option<R>
fn find_map_any<P, R>(self, predicate: P) -> Option<R>
Applies the given predicate to the items in the parallel iterator
and returns any non-None result of the map operation. Read more
§fn find_map_first<P, R>(self, predicate: P) -> Option<R>
fn find_map_first<P, R>(self, predicate: P) -> Option<R>
Applies the given predicate to the items in the parallel iterator and
returns the sequentially first non-None result of the map operation. Read more
§fn find_map_last<P, R>(self, predicate: P) -> Option<R>
fn find_map_last<P, R>(self, predicate: P) -> Option<R>
Applies the given predicate to the items in the parallel iterator and
returns the sequentially last non-None result of the map operation. Read more
§fn any<P>(self, predicate: P) -> bool
fn any<P>(self, predicate: P) -> bool
Searches for some item in the parallel iterator that
matches the given predicate, and if so returns true. Once
a match is found, we’ll attempt to stop process the rest
of the items. Proving that there’s no match, returning false,
does require visiting every item. Read more
§fn all<P>(self, predicate: P) -> bool
fn all<P>(self, predicate: P) -> bool
Tests that every item in the parallel iterator matches the given
predicate, and if so returns true. If a counter-example is found,
we’ll attempt to stop processing more items, then return false. Read more
§fn while_some<T>(self) -> WhileSome<Self>
fn while_some<T>(self) -> WhileSome<Self>
Creates an iterator over the
Some
items of this iterator, halting
as soon as any None
is found. Read more§fn panic_fuse(self) -> PanicFuse<Self>
fn panic_fuse(self) -> PanicFuse<Self>
Wraps an iterator with a fuse in case of panics, to halt all threads
as soon as possible. Read more
§fn collect<C>(self) -> Cwhere
C: FromParallelIterator<Self::Item>,
fn collect<C>(self) -> Cwhere
C: FromParallelIterator<Self::Item>,
Creates a fresh collection containing all the elements produced
by this parallel iterator. Read more
§fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB)
fn unzip<A, B, FromA, FromB>(self) -> (FromA, FromB)
Unzips the items of a parallel iterator into a pair of arbitrary
ParallelExtend
containers. Read more§fn partition<A, B, P>(self, predicate: P) -> (A, B)
fn partition<A, B, P>(self, predicate: P) -> (A, B)
Partitions the items of a parallel iterator into a pair of arbitrary
ParallelExtend
containers. Items for which the predicate
returns
true go into the first container, and the rest go into the second. Read more§fn partition_map<A, B, P, L, R>(self, predicate: P) -> (A, B)
fn partition_map<A, B, P, L, R>(self, predicate: P) -> (A, B)
Partitions and maps the items of a parallel iterator into a pair of
arbitrary
ParallelExtend
containers. Either::Left
items go into
the first container, and Either::Right
items go into the second. Read more§fn take_any(self, n: usize) -> TakeAny<Self>
fn take_any(self, n: usize) -> TakeAny<Self>
Creates an iterator that yields
n
elements from anywhere in the original iterator. Read more§fn skip_any(self, n: usize) -> SkipAny<Self>
fn skip_any(self, n: usize) -> SkipAny<Self>
Creates an iterator that skips
n
elements from anywhere in the original iterator. Read more§fn take_any_while<P>(self, predicate: P) -> TakeAnyWhile<Self, P>
fn take_any_while<P>(self, predicate: P) -> TakeAnyWhile<Self, P>
Creates an iterator that takes elements from anywhere in the original iterator
until the given
predicate
returns false
. Read more§fn skip_any_while<P>(self, predicate: P) -> SkipAnyWhile<Self, P>
fn skip_any_while<P>(self, predicate: P) -> SkipAnyWhile<Self, P>
Creates an iterator that skips elements from anywhere in the original iterator
until the given
predicate
returns false
. Read more§fn collect_vec_list(self) -> LinkedList<Vec<Self::Item>>
fn collect_vec_list(self) -> LinkedList<Vec<Self::Item>>
Collects this iterator into a linked list of vectors. Read more
Auto Trait Implementations§
impl<'a> Freeze for GroupsProxyParIter<'a>
impl<'a> RefUnwindSafe for GroupsProxyParIter<'a>
impl<'a> Send for GroupsProxyParIter<'a>
impl<'a> Sync for GroupsProxyParIter<'a>
impl<'a> Unpin for GroupsProxyParIter<'a>
impl<'a> UnwindSafe for GroupsProxyParIter<'a>
Blanket Implementations§
Source§impl<T> BorrowMut<T> for Twhere
T: ?Sized,
impl<T> BorrowMut<T> for Twhere
T: ?Sized,
Source§fn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
Source§impl<I> ChunkedCollectParIterExt for Iwhere
I: ParallelIterator,
impl<I> ChunkedCollectParIterExt for Iwhere
I: ParallelIterator,
fn collect_ca_with_dtype<B: FromParIterWithDtype<Self::Item>>(
self,
name: PlSmallStr,
dtype: DataType,
) -> Bwhere
Self: Sized,
Source§impl<T> IntoEither for T
impl<T> IntoEither for T
Source§fn into_either(self, into_left: bool) -> Either<Self, Self>
fn into_either(self, into_left: bool) -> Either<Self, Self>
Converts
self
into a Left
variant of Either<Self, Self>
if into_left
is true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read moreSource§fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
Converts
self
into a Left
variant of Either<Self, Self>
if into_left(&self)
returns true
.
Converts self
into a Right
variant of Either<Self, Self>
otherwise. Read more